Schneider Electric LP1K0910BD TeSys K Kontaktör – 9A, 3 Kutuplu, 4kW @ 400V (AC‑3), 24V DC Bobin Tedarikçi | SIMPLYBUY
海报

Schneider Electric LP1K0910BD TeSys K Kontaktör – 9A, 3 Kutuplu, 4kW @ 400V (AC‑3), 24V DC Bobin

Üretici: Schneider Electric
Modeli: LP1K0910BD
Tip: TeSys K Contactor
Anma Akımı: 9 A (AC-3)
Bobin Voltajı: 24 V DC
Motor Gücü: 4 kW @ 400 V AC
Yardımcı İletişim: 1 HAYIR

Ürün Açıklaması

The Schneider Electric LP1K0910BD is a compact 3-pole TeSys K contactor designed for motor control and resistive load switching in industrial, infrastructure, and building applications. Rated 9 A in AC-3 category (up to 440 V) and 4 kW at 400 V, it features a 24 V DC control coil and a built-in 1 NO auxiliary contact, enabling straightforward integration into PLC and electronic control systems. The contactor offers screw clamp terminals, DIN-rail or plate mounting, and a width of only 45 mm. With a mechanical durability of 10 million operating cycles and compliance with IEC, UL, CSA, CCC, EAC, and marine standards, the LP1K0910BD delivers reliable performance in a very compact footprint.

Standart Özellikler

  • 24 V DC Coil: Low-power DC control coil enables direct interface with PLC outputs and electronic control circuits without additional relays.
  • Compact 45 mm Width: One of the smallest contactors in its class, saving valuable DIN-rail space in control panels.
  • Built-in 1 NO Auxiliary Contact: Provides an integrated signal contact for status feedback and control interlocking, reducing wiring effort.
  • AC-3 Motor Rating 9 A / 4 kW: Suitable for direct-on-line starting of small three-phase motors up to 4 kW at 400 V AC.
  • Vidalı Kelepçe Terminalleri: Reliable wiring with 1.3 N·m tightening torque, accepting standard industrial conductors.
  • High Mechanical Durability: Rated for 10 million operating cycles, ensuring long service life in frequent switching applications.
  • Çoklu Standart Uyumluluğu: Certified to IEC 60947-4-1, UL 508, CSA C22.2, CCC, EAC, and marine standards for worldwide use.

Teknik Özellikler

ParametreDeğer
ÜreticiSchneider Electric
ModelLP1K0910BD
SeriTeSys K
Ürün TürüKontaktör
Nominal Çalışma Akımı (AC-3)9 A (≤ 440 V AC)
Motor Power (AC-3)4 kW at 400 V AC
Bobin Voltajı24 V DC
Yardımcı İletişim1 HAYIR
Nominal İzolasyon Gerilimi (Ui)690 V (IEC 60947-4-1)
Nominal Darbe Dayanım Gerilimi (Uimp)8 kV
MontajDIN rail or plate
StandartlarIEC 60947-4-1, UL 508, CSA C22.2 No 14

Teklif Alın

    ✕

    Teklif Alın

      ✕

      Kataloğu İndir