Schneider Electric 56173 VigiPacT RH99M Earth-Leakage Relay – 0.03–30 A Sensitivity, 0–4.5 s Delay, 220–240 V AC, Manual Reset

제품 설명

The Schneider Electric 56173 is a VigiPacT RH99M residual current protection relay designed for earth-leakage monitoring and protection in low-voltage electrical installations. It works in conjunction with a compatible Schneider Electric Type A toroid or rectangular sensor to measure residual earth-leakage current, tripping an associated circuit breaker when the set threshold is exceeded. The relay offers a wide sensitivity range of 0.03–30 A with 9 selectable thresholds and a time delay adjustable from instantaneous to 4.5 s in 9 steps. It operates on a 220–240 V AC 50/60 Hz supply and provides 1 NO + 1 NC + 1 C/O output contacts. The unit mounts on a 35 mm DIN rail inside a switchboard, features IP40 front protection, and requires a local manual reset after fault clearance. Typical applications include protection against direct and indirect contact, fire hazards, and motor earth faults in industrial, commercial, and infrastructure power distribution systems.

기본 사양

• Wide Sensitivity Range 0.03–30 A: Nine selectable residual current thresholds from 30 mA to 30 A allow precise adaptation to different protection requirements, from personnel safety to fire hazard prevention.
• Adjustable Time Delay 0–4.5 s: Nine selectable delay settings from instantaneous to 4.5 s enable selective coordination with upstream and downstream protective devices.
• Manual Reset with Local Control: The relay requires a local manual reset after fault clearance, ensuring the cause of the fault is investigated before re-energization.
• Continuous Monitoring: The relay continuously monitors the power supply, the relay-to-toroid link, and internal electronics, providing early detection of system faults.
• ComPacT Circuit Breaker Coordination: Ensures coordination with ComPacT circuit breakers, switching off within 40 ms for fast and reliable fault disconnection.
• Type A Residual Current Detection: Works with Schneider Electric Type A toroids or rectangular sensors to detect AC and pulsating DC residual currents.
• Reinforced Insulation (Overvoltage Category IV): VigiPacT relays feature reinforced insulation rated for overvoltage category IV, suitable for installation at the origin of the electrical supply.

기술 사양

매개변수	값
제조업체	슈나이더 일렉트릭
모델	56173
시리즈	비지팩트
장치 약칭	RH99M
제품 유형	Residual Current Protection Relay (Earth-Leakage Relay)
정격 공급 전압	220–240 V AC, 50/60 Hz
잔류 전류 감도	0.03–30 A (9 selectable thresholds)
Time Delay	0–4.5 s (9 selectable settings)
Output Contacts	1 NO + 1 NC + 1 C/O
정격 임펄스 내전압(Uimp)	8kV
Monitored System Voltage	Up to 1000 V AC, 50/60/400 Hz
설치	DIN 레일(35mm)
보호 등급	IP40 (front face)
크기 (가로 × 세로 × 깊이)	54 mm × 97 mm × 74 mm
순중량	0.276 kg
표준	IEC 60947-2; Green Premium (RoHS/REACh)