Schneider Electric 56173 VigiPacT RH99M Earth-Leakage Relay – 0.03–30 A Sensitivity, 0–4.5 s Delay, 220–240 V AC, Manual Reset

製品説明

The Schneider Electric 56173 is a VigiPacT RH99M residual current protection relay designed for earth-leakage monitoring and protection in low-voltage electrical installations. It works in conjunction with a compatible Schneider Electric Type A toroid or rectangular sensor to measure residual earth-leakage current, tripping an associated circuit breaker when the set threshold is exceeded. The relay offers a wide sensitivity range of 0.03–30 A with 9 selectable thresholds and a time delay adjustable from instantaneous to 4.5 s in 9 steps. It operates on a 220–240 V AC 50/60 Hz supply and provides 1 NO + 1 NC + 1 C/O output contacts. The unit mounts on a 35 mm DIN rail inside a switchboard, features IP40 front protection, and requires a local manual reset after fault clearance. Typical applications include protection against direct and indirect contact, fire hazards, and motor earth faults in industrial, commercial, and infrastructure power distribution systems.

標準機能

• Wide Sensitivity Range 0.03–30 A: Nine selectable residual current thresholds from 30 mA to 30 A allow precise adaptation to different protection requirements, from personnel safety to fire hazard prevention.
• Adjustable Time Delay 0–4.5 s: Nine selectable delay settings from instantaneous to 4.5 s enable selective coordination with upstream and downstream protective devices.
• Manual Reset with Local Control: The relay requires a local manual reset after fault clearance, ensuring the cause of the fault is investigated before re-energization.
• Continuous Monitoring: The relay continuously monitors the power supply, the relay-to-toroid link, and internal electronics, providing early detection of system faults.
• ComPacT Circuit Breaker Coordination: Ensures coordination with ComPacT circuit breakers, switching off within 40 ms for fast and reliable fault disconnection.
• Type A Residual Current Detection: Works with Schneider Electric Type A toroids or rectangular sensors to detect AC and pulsating DC residual currents.
• Reinforced Insulation (Overvoltage Category IV): VigiPacT relays feature reinforced insulation rated for overvoltage category IV, suitable for installation at the origin of the electrical supply.

技術仕様

パラメータ	価値
メーカー	シュナイダーエレクトリック
モデル	56173
シリーズ	ビジパック
デバイスの略称	RH99M
製品タイプ	Residual Current Protection Relay (Earth-Leakage Relay)
定格供給電圧	220–240 V AC, 50/60 Hz
残留電流感度	0.03–30 A (9 selectable thresholds)
Time Delay	0–4.5 s (9 selectable settings)
Output Contacts	1 NO + 1 NC + 1 C/O
定格インパルス耐電圧（Uimp）	8 kV
Monitored System Voltage	Up to 1000 V AC, 50/60/400 Hz
取り付け	DINレール（35mm）
保護の程度	IP40 (front face)
寸法（幅×高さ×奥行）	54 mm × 97 mm × 74 mm
正味重量	0.276 kg
標準	IEC 60947-2; Green Premium (RoHS/REACh)