Interrupteur de fin de course Telemecanique XCRE18 OsiSense XC – 2×(1NF+1NO), Levier à tringlerie croisée, Fermeture rapide, Boîtier métallique, IP54 Fournisseur | SIMPLYBUY
海报

Telemecanique XCRE18 OsiSense XC Interrupteur de fin de course – 2×(1NF+1NO), Levier à tige croisée, Action à fermeture rapide, Corps métal, IP54

Fabricant: Capteurs Telemecanique
Modèle: XCRE18
Taper: Limit Switch
Configuration des contacts : 2×(1 NC + 1 NO)
Nombre de pôles : 4
Type d'actionneur : Stay put crossed rods lever, 6 mm square rod
Indice de protection : IP54

Description du produit

The Telemecanique XCRE18 is a fixed-body limit switch from the OsiSense XC range, designed for position detection in hoisting and mechanical handling applications. It features a rotary head with a stay-put crossed rods lever (6 mm square rod), enabling lateral approach from two directions. The switch has four poles configured as 2×(1 NC + 1 NO) contacts with snap action and positive opening for safety-related circuits. Its zinc alloy body provides high mechanical durability, withstanding 68 gn shock and 9 gn vibration. Rated IP54, it operates reliably from -25 °C to +70 °C. Screw-clamp terminals and a Pg 13.5 cable entry simplify installation. Typical applications include crane end-of-travel detection and gate position monitoring.

Caractéristiques standard

  • Crossed Rods Lever Actuator: Stay-put crossed rods lever with 6 mm square rod enables lateral approach from two directions for flexible position sensing.
  • 4-Pole Snap Action Contacts: Two sets of (1 NC + 1 NO) contacts with snap action provide reliable, rapid switching for control circuits.
  • Positive Opening Safety Contacts: Complies with IEC 60947-5-1 with a minimum positive opening torque of 0.7 N·m for dependable safety performance.
  • Rugged Zinc Alloy Body: Metal enclosure withstands 68 gn shock and 9 gn vibration, ensuring long-term reliability in demanding environments.
  • High Mechanical Durability: Rated for 10,000,000 mechanical operating cycles, suitable for high-frequency applications.
  • IP54 Protection Rating: Protected against dust and water splashes, with an operating temperature range of -25 °C to +70 °C.
  • IEC and CSA Certified: Conforms to IEC 60947-5-1, IEC 60204-1, and CSA C22.2 No 14 standards for worldwide acceptance.

Spécifications techniques

ParamètreValeur
FabricantCapteurs Telemecanique
ModèleXCRE18
SérieOsiSense XC / XCR
Type de produitLimit Switch
Type et composition des contacts2 × (1 NF + 1 NO)
Nombre de pôles4
Opération de contactAction à fermeture rapide
Ouverture positiveAvec
Tension d'isolation nominale (Ui)500 V (IEC 60947-1)
Tension de tenue aux impulsions nominale (Uimp)6 kV
Degré de protection IPIP54
Température ambiante de fonctionnement-25…+70 °C

Obtenir un devis

    ✕

    Obtenir un devis

      ✕

      Télécharger le catalogue