Bloc de contacts auxiliaires Schneider Electric LADN11C TeSys D – 1 NO + 1 NF, Montage frontal, 10A, 690V AC Fournisseur | SIMPLYBUY
海报

Schneider Electric LADN11C TeSys D Bloc de Contacts Auxiliaires – 1 NO + 1 NF, Montage Avant, 10A, 690V AC

Fabricant: Schneider Electric
Modèle: LADN11C
Taper: Bloc de contacts auxiliaires
Configuration des contacts : 1 NO + 1 NF
Montage: Front Mounting
Tension nominale de fonctionnement : 690 V CA
Type de terminal : Bornes à vis

Description du produit

The Schneider Electric LADN11C is a front-mounting instantaneous auxiliary contact block from the TeSys Deca range, designed to expand the control circuit capacity of contactors and relays. It provides one normally open (NO) and one normally closed (NC) contact, with a rated operational voltage of 690 V AC (25–400 Hz) and a conventional free air thermal current of 10 A at 60 °C. The contacts are rated for 6 A at 120 V AC-15 and feature a minimum switching current of 5 mA at 17 V, ensuring reliable performance in low-power signal circuits. The block is compatible with TeSys D LC1D, TeSys F LC1F, TeSys Deca LC1D, and CR1F contactors, as well as CAD control relays. Its screw clamp terminals accept conductors from 1 to 4 mm², and the compact 26 mm × 48 mm × 42 mm housing mounts directly onto the front face of compatible devices without tools.

Caractéristiques standard

  • 1 NO + 1 NC Contact Configuration: Provides one normally open and one normally closed instantaneous contact for flexible control circuit expansion.
  • High Rated Operational Voltage: 690 V AC (25–400 Hz) conforming to IEC 60947-5-1, suitable for a wide range of industrial control applications.
  • Reliable Low-Level Switching: Minimum switching current of 5 mA at 17 V ensures dependable signal transmission in low-power circuits.
  • High Mechanical Durability: Rated for 30 million operating cycles, providing long-term reliability in high-frequency switching applications.
  • Front Clip-On Mounting: Installs directly onto the front face of compatible TeSys contactors and relays without additional tools or accessories.
  • Bornes à vis : Accepts 1–4 mm² flexible and rigid conductors, with a tightening torque of 1.7 N·m for secure connections.
  • Global Approvals & IEC 60335-1 Compliance: Certified to EN/IEC 60947-5-1, UL, CSA, CCC, EAC, and UKCA; meets IEC 60335-1 for improved fire resistance.

Spécifications techniques

ParamètreValeur
FabricantSchneider Electric
ModèleLADN11C
SérieTeSys Deca / TeSys D
Type de produitBloc de contacts auxiliaires
Composition du contact polaire1 NO + 1 NF
Emplacement de montageFront
Tension de fonctionnement nominale (Ue)690 V AC, 25…400 Hz
Courant nominal de fonctionnement (Ie)6 A at 120 V AC-15; 1.04 A at 690 V AC-15
Courant thermique conventionnel (Ith)10 A at 60 °C
Courant de commutation minimal5 mA at 17 V
Durabilité mécanique30,000,000 operating cycles
Type de terminalScrew clamp terminals (1–4 mm²)
NormesEN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5

Obtenir un devis

    ✕

    Obtenir un devis

      ✕

      Télécharger le catalogue