Interruptor de fin de carrera Telemecanique XCRE18 OsiSense XC – 2×(1NC+1NO), Palanca de varillas cruzadas, Acción rápida, Carcasa metálica, IP54 Proveedor | SIMPLYBUY
海报

Telemecanique XCRE18 OsiSense XC Interruptor de Límite – 2×(1NC+1NO), Palanca de Varilla Cruzada, Acción Rápida, Cuerpo Metálico, IP54

Fabricante: Sensores Telemecanique
Modelo: XCRE18
Tipo: Limit Switch
Configuración de contacto: 2×(1 NC + 1 NO)
Número de polos: 4
Tipo de actuador: Stay put crossed rods lever, 6 mm square rod
Clasificación de protección: IP54

Descripción del Producto

The Telemecanique XCRE18 is a fixed-body limit switch from the OsiSense XC range, designed for position detection in hoisting and mechanical handling applications. It features a rotary head with a stay-put crossed rods lever (6 mm square rod), enabling lateral approach from two directions. The switch has four poles configured as 2×(1 NC + 1 NO) contacts with snap action and positive opening for safety-related circuits. Its zinc alloy body provides high mechanical durability, withstanding 68 gn shock and 9 gn vibration. Rated IP54, it operates reliably from -25 °C to +70 °C. Screw-clamp terminals and a Pg 13.5 cable entry simplify installation. Typical applications include crane end-of-travel detection and gate position monitoring.

Características estándar

  • Crossed Rods Lever Actuator: Stay-put crossed rods lever with 6 mm square rod enables lateral approach from two directions for flexible position sensing.
  • 4-Pole Snap Action Contacts: Two sets of (1 NC + 1 NO) contacts with snap action provide reliable, rapid switching for control circuits.
  • Positive Opening Safety Contacts: Complies with IEC 60947-5-1 with a minimum positive opening torque of 0.7 N·m for dependable safety performance.
  • Rugged Zinc Alloy Body: Metal enclosure withstands 68 gn shock and 9 gn vibration, ensuring long-term reliability in demanding environments.
  • High Mechanical Durability: Rated for 10,000,000 mechanical operating cycles, suitable for high-frequency applications.
  • IP54 Protection Rating: Protected against dust and water splashes, with an operating temperature range of -25 °C to +70 °C.
  • IEC and CSA Certified: Conforms to IEC 60947-5-1, IEC 60204-1, and CSA C22.2 No 14 standards for worldwide acceptance.

Especificaciones técnicas

ParámetroValor
FabricanteSensores Telemecanique
ModeloXCRE18
SerieOsiSense XC / XCR
Tipo de productoLimit Switch
Tipo y composición de los contactos2 × (1 NC + 1 NO)
Número de polos4
Operación de contactoAcción rápida
Apertura positivaCon
Tensión de aislamiento nominal (Ui)500 V (IEC 60947-1)
Tensión nominal soportada al impulso (Uimp)6 kV
Grado de protección IPIP54
Temperatura ambiente de funcionamiento-25…+70 °C

Obtenga una cotización

    ✕

    Obtenga una cotización

      ✕

      Descargar catálogo